A-A-50782 Work Station, Laminar FlowThis commercial item description covers a Console Type, Horizontal Laminar Airflow, Class 100 cleanliness level clean work station.

Pages 1 - 2 - 3

4. Work surface

Melamine resin equal to Formica or Micarta (registered trademarks). Color blue, light gray, frost green or white.

5.  Lighting

- 150 foot candles min. at work surface, color whites fluorescent type, self-contained Underwriter Laboratories (U.L.) approved.

6. Prefilters

- Throwaway replacement type, removable from front.

7. Final filters

- HEPA (High Efficiency Particulate Air) 99.99% or more effective on particles 0.3 micron and larger 100% leak probed. Aluminum separators removable from bear.

8. Filter mounting

- Spring tension compression seal.

9. Blower

- Direct drive type. To maintain minimum average 90 cubic feet per minute. Variably controlled.

10. Blower control

- Solid state. Mounted in blower housing.

11. Electrical

- 115v/60 Hz, single phase, shall meet NFPA 70. All components shall be U.L. approved.

12. Power cord

- Six foot three wire power cord of adequate size to operate fan motors and lights shall exit from back of cabinet. Termination shall be standard, three prong plug.

13. Motor

- Shall meet NEMA Standard MG-1.

14. Work area

- Minimum 46.5 inches wide by 22 inches deep by 22 inches high. Work surface 30 to 32 inches from floor.

15. Performance

- Dust count: Less than 100 particles/cu ft 0.3 micron and larger shall meet class 100

“Clean Work Station” requirements of Federal

Standard 209 and Air Force T.O. 00-25-203.

16. Overall size and

weight

- 60 inches high X 34 inches deep X 51 inches wide - 450 lbs, (for reference only).